1 Channel in 3 Channel Out Servo Speed/Direction Regulator $25

A fully adjustable 1 channel-in 3 channel-out Servo Regulator which can be used on any receiver channel and will increase the servo travel time, direction and duration. Great for scale model mechanisms where scale detail and characteristics are important. No more ((boing!)) cartoon like masts,doors and radar action.

Weight: 3g

Input: 1 servo Channel.

Output: 3 Channels.

Options: Travel Speed & Travel Time in both directions.

Glitch Assassin $7

Assassinate your glitching problems. The Glitch Assassin works by storing power from the BEC, and acting as a filter to eliminate any noises generated by servos that can wreak havoc on your radio system. Another benefit is that it reduces the load on the BEC. Just plug it directly into any open channel or battery slot on the receiver.

Reciever Controlled Switch w/ Fail Safe $25

Plug it into your receiver and you instantly have an on/off switch controlled by any channel on your radio. The switch will complete a circuit when the radio channel passes 50%. Great for custom lighting, sound effects,or small pumps. The possibilities are endless!

The fail safe mode is adjustable to last switch position,switch off,switch on,on/off alternately.

Max Amps: 10A

Max Volts: 30v

Weight: 7g

9g / 1.6kg / .12sec Micro Servo $6

One of the best value micro servos available.

Size:21x12x22 mm / 0.74x0.42x0.78 in

Max Volts:3v ~ 6v

Weight:9g / 0.32oz

Speed:0.12 sec/60(4.8V)

Torque:1.6 kg-cm

Teflon Bushing, 15cm wire, coreless motor Servo arms & screw included

3A UBEC w/ Noise Reduction $12

Over current and over heat protection.

Switching frequency 300khz.

Chip Efficiency is 92%. This UBEC utilises switching technology to gain a much higher efficiency than liniar BEC. Which means less heat and longer battery life.

The UBEC is equiped with a noise reduction alloy housing to reduce noise even further.

Incorrect polarity safety feature ensures the UBEC will not be destroyed should the battery be connected incorrectly.

Output:5v/3A or 6v/3A (Selectable via jumper)

Input:5.5v-23v (2-5S Lipo pack, 5-15cells NiMh)

Size: 41.6x16.6x7.0mm

Weight:7.5g

V-Tail Mixer. Ultra-small $10

An advanced electronic servo mixer for x tail submarines.

Extremely easy to use and very reliable.

Universal Charging Harness $10

A charge harness to meet most of your needs.

Electrical Connectors $1.50

Excellent W.S. Deans T-connector replacements. Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. All this ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant.

Selection

Male Female

Find Me Beacon $7.00

Anyone who has had to dive for a missing sub knows how hard it can be to track one down by motor noise alone. Plug this in to a spare channel on your receiver and the Buzzer can be activated by a switch on your TX or put it in parralel with your failsafe unit. Switch the buzzer on to help locate a sub.

Turnigy Lipo Charger / 2s~4s $40

The Turnigy 420 is a simple and easy to use balance charger which can handle 2 to 4 cells and charge at a rate of 2A. You can also charge two 2s lipos of similar capacity at the same time. With an input voltage of around 12v you will be able to use wall adapters or a car battery to power this unit. The 420 will also show you battery percentage full during charge. You wont need any complicated wire systems to use this charger. Just plug in the balance plug, set the desired charge rate and youre done! A very easy to use and robust system! Unit does not come with wall adapter.

ZIPPY Flightmax 2200mAh 2S1P 20C $25

Zippy Flightmax batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!

Capacity: 2200mah

Volts: 2S1P / 2 Cell / 7.4v

Weight: 123g

Balance Plug: JST-XH

ZIPPY Flightmax 2200mAh 3S1P 20C $25

Zippy Flightmax batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!

Capacity: 2200mah

Volts: 3S1P / 3 Cell / 11.1v

Weight: 180g

Balance Plug: JST-XH